CVTAJ-01
Ankraj & Ankraj Saplamaları

  • Having a capacity of high strength tensile, resistance to heat; anchor roads and tightner bars are mostly used in steel construction, hard concrete, machinery industry, viaduct, bridge and road construction.
  • Provides both the concrete and steel to be clamped to the concrete easily and safely.
  • Produced in different shapes and sizes.
  • Anchor Rods are produced in the sizes mentioned bellow in SAE 1010 – 1020 – 1040 – 4140 – 5140 – ST 37 – ST 42 – ST 52; AISI 316 Stainless Steel (INOX).
  • Space Sizes, Thread Lenghts and other dimensions can also be produced as requested.
  • The diameter of the material is produced according to DIN 34828 , however upon request it also can be produced relative to DIN 525.
  • Available in Lengths from 20 cm up to 12 meters.

Ankraj & Ankraj Saplamaları

Yatay Noktasal Bağlantı
 
 
Installation Types – Horizontal Fixing

  • Direct installation to the concrete with Steel Anchors.
  • Each product carries half weight of the stone, thus products should be choosen accordingly.
  • Types of Anchors and Adjustable Arms should be choosen according to the thickness of the insulation used on the facade of the building.

Yatay Noktasal Bağlantı

 
 
Installation Types – Vertical Fixing
 

  • Direct installation to the concrete with Steel Anchors.
  • Each product carries half weight of the stone, thus products should be choosen accordingly.
  • Load Bearing and Restraint Elements should be choosen according to the deadweight of the stone.
  • Types of Anchors and Adjustable Arms should be choosen according to the thickness of the insulation used on the facade of the building.

Dikey Noktasal Bağlantı

Profilli Yatay Bağlantı

Installation Types – Channel System Horizontal Fixing

  • L Anchors, the main load of the bearing system, should be connected to the concrete elements of the building with Steel Anchhors.
  • Before the installation of the L Anchor, the insulation material should be cut to the size of the “L Anchor”.
  • After installing L Anchors, Channels must be replaced according to the dimension of the stone and the installation type. Hexagon Head Bolts must be used during the installation process of the Channels to the L Anchors.
  • With the profiles installed, types of Anchors and Adjustable Arms should be selected according to the deadweight of the stone and the installation type.

Profilli Yatay Bağlantı

Profilli Dikey Bağlantı
Profilli Dikey Bağlantı
Installation Types – Channel System Vertical Fixing

  • L Anchors the main load of the bearing system, should be connected to the concrete elements of the building with Steel Anchhors.
  • Before the installation of the L Anchor, the insulation material should be cut to the size of the “L Anchor”.
  • After installing L Anchors, Channels must be replaced according to the dimension of the stone and the installation type. Hexagon Head Bolts must be used during the installation process of the Channels to the L Anchors.
  • With the profiles installed, types of Anchors and Adjustable Arms should be selected according to the deadweight of the stone and the installation type.

Profilli Dikey Bağlantı

"L" Profilli Bağlantı
"L" Profilli Bağlantı
Installation Types – “L” Channel System Fixing

  • L Anchors, the main load of the bearing system, should be connected to the concrete elements of the building with Steel Anchhors.
  • Before the installation of the L Anchor, the insulation material should be cut to the size of the “L Anchor”.
  • After installing L Anchors, Channels must be replaced according to the dimension of the stone and the installation type. Hexagon Head Bolts must be used during the installation process of the Channels to the L Anchors.
  • L Channels are fixed to U Profiles with Hexagon Head Bolts.
  • After L Channel installation is completed, due to the vertical grid format, the assembly of the stone is completed with Anchors and Adjustable Arms.

"İnce Taşlar" için Profilli Bağlantılar
"İnce Taşlar" için Profilli Bağlantılar
"İnce Taşlar" için Profilli Bağlantılar
Installation Types – Channel Fixing For “Thin” Stones

  • L Anchors, the main load of the bearing system, should be connected to the concrete elements of the building with Steel Anchhors.
  • Before the installation of the L Anchor, the insulation material should be cut to the size of the “L Anchor”.
  • After installing L Anchors, Channels must be replaced according to the dimension of the stone and the installation type. Hexagon Head Bolts must be used during the installation process of the Channels to the L Anchors.
  • The product CVTAJBL-10, which is especially designed for thin stone application, is used in double applications.
    One side is used for fixation in to the cutted (grooved) stone, while the other side is used for fixation of the U Profile System using Hexagon Head Bolts, nuts and washers.

[vc_row][vc_column][vc_masonry_media_grid gap=”10″ item=”masonryMedia_SolidBlurOut” initial_loading_animation=”fadeIn” grid_id=”vc_gid:1489314963498-b0d55a7f-76c9-9″ include=”1411,1412,1410,1408,1409″][/vc_column][/vc_row]

[vc_row][vc_column][vc_masonry_media_grid gap=”10″ item=”masonryMedia_SolidBlurOut” initial_loading_animation=”fadeIn” grid_id=”vc_gid:1489507208330-9f3de83b-c2a5-6″ include=”1638,1637,1636,1634,1635,1633,1632,1631,1630″][/vc_column][/vc_row]

[vc_row][vc_column][vc_masonry_media_grid gap=”10″ item=”masonryMedia_SolidBlurOut” grid_id=”vc_gid:1489502739490-a5775bca-fe3a-5″ include=”1505,1515,1514,1513,1512,1510,1511,1509,1508,1507,1506″][/vc_column][/vc_row]


 

[vc_row][vc_column][vc_masonry_media_grid gap=”10″ item=”masonryMedia_SolidBlurOut” grid_id=”vc_gid:1489503153823-d7771165-d977-7″ include=”1524,1523,1522,1520,1521,1519,1518″][/vc_column][/vc_row]