CVTAJ-15

Ayarlanabilir Taşıyıcı & Tutucu “Z” Ankraj (Tırtıllı & Tırtılsız)

  • Especially preferred in exterior mounting of the buildings, especially in natural stone, marble, granite assemblies. Provides easy and safe assembly.
  • Used in fixing the natural stone to the concrete.
  • Produced from 430, 304 (A2), 316 (A4) Quality Stainless Steel (INOX).
  • Upon request, “Hole Size” can be produced as M12, M14 or M16.

Ayarlanabilir Taşıyıcı & Tutucu “Z” Ankraj (Tırtıllı & Tırtılsız)

CVTAJ/RN-15
“Perçin Somunlu” Soffit Ankraj

  • Specially designed for ceiling coverings of natural stone.
  • Provides easy fixing with River Nut on.
  • Upon request, can also be produced as “serrated”.
  • Produced from 430, 304 (A2), 316 (A4) Quality Stainless Steel (INOX).
  • Upon request, “River Nut” can be produced as M12 or M14.

“Perçin Somunlu” Soffit Ankraj

CVTAJ-03
cvtaj-03

  • Anchors are one of the most preferred fitting elements used in exterior construction of the buildings especially in natural stone, marble, granite assemblies, as they can easily be mounted on the wall.
  • Produced from 430 – 304 (A2) – 316 (A4) Quality Stainless Steel (INOX).
  • Upon request, can also be produced as M8.

cvtaj-03-t

CVTAJ-04
cvtaj-04

  • Adjustable arms used with “Adjustable Supporter & Binding Z Anchors”.
  • Used to adjust the cavity between the wall and the material.
  • Produced from 304 (A2) – 316 (A4) Quality Stainless Steel (INOX).
  • Upon request, can also be produced as M8.

cvtaj-04-t

CVTAJ-13/W
cvtaj-13-w

  • Round Anchor is used as a “carrier” anchor on vertical grouting of the concrete and brick walls.
  • Also used as a “binding” anchor especially for mounting the last range of stones on the horizontal grouting on the concrete and brick walls.
  • Upon request, can be produced in different sizes.
  • Usually produced from  “Electro Galvanized”, “Hot Dip Galvanized”,  430 – 304 (A2) – 316 (A4) Quality Stainless Steel (INOX).

cvtaj-13-w-t

CVTAJ-13/P
Taşıyıcı Tutucu Ankraj CVTAJ-13/P

  • Round Anchor is used as a “carrier” anchor on vertical grouting of the concrete and brick walls.
  • Also used as a “binding” anchor especially for mounting the last range of stones on the horizontal grouting on the concrete and brick walls.
  • Upon request, can be produced in different sizes.
  • Usually produced from  “Electro Galvanized”, “Hot Dip Galvanized”,  430 – 304 (A2) – 316 (A4) Quality Stainless Steel (INOX).

Taşıyıcı Tutucu Ankraj CVTAJ-13/P

CVTAJ-16

cvtaj-16

  • Used to adjust the cavity between the wall and the material.
  • Practically used in mounting double stones at once.
  • “Sheet Metal” can be produced according to the sizes requested.
  • Upon request, “Hole Diameters” on the Sheet Metal can be produced in 4,0 – 5,0 – 6,0 mm.
  • Produced from 304 (A2) – 316 (A4)Quality Stainless Steel (INOX).
  • Upon request, can also be produced as M8.
  • The size of “A” & “E” in the table given below, can differ according to the sizes of the project requirements. In other words, other sizes can also be produced according to the customers’ requirements.

cvtaj-16-t

“Düz” ve “Kıvrık” Yaprak Ankrajlar
cvtaj-07-cvtaj-08

  • Ideal for use in assemblies to brick and concrete walls.
  • Can be produced either “Pim Perforated” or “Bolt Perforated”.
  • With the plate underneath, prevents the brick to be broken, especially on the vertical assemblies on the wall.
  • Leaf Anchors can be produced either “With Welded Plate” or “Without Welded Plate”.
  • Produced from 430 – 304 (A2) – 316 (A4) Quality Stainless Steel (INOX).
  • In Vertical Stone Fixing Applications, the Plain or Twisted part of the Leaf Anchor is fixed to the concrete by cement,  while the other part with hole is connected to the Profile with Bolt, Nut and Washer. With this type of application the channel does not yield.
  • In Direct Fixing Applications, Plain or Twisted part is fixed to the concrete by cement. The other part is connected directly to the pim on the anchor.

cvtaj-07-cvtaj-08-t